• $3,495.00
Shipping calculated at checkout.

Please email me to order

Nominal thrust:  250N (56.2lb) at 110.000 RPM
Idle thrust: 6N 
Idle RPM:  25,000
Diameter:  122.0mm  (4.8”)  
Length: 272.6mm  (10,7") 
Engine weight: 1.940g (4.2lb)  
Installed weight: 2.040g (4.57lb) (battery not included).
Fuel:  Kerosene +  3% - 5% oil

Consumption: 700g/min@250N

Along with features developed for the M166TS engine, our new M250QS (Quick Start) features a new and revolutionary Igniter Fuel System which allows an even better  distribution of atomized fuel. The proof is is the incredibly fast start and Re-Start times

 The engine has a single fuel input directly from the pump, and a 3-wire electrical connection to the ecu that carries the battery power and a bidirectional digital bus. All engine data is transmitted to the ecu in a digital data format, using a high speed proprietary protocol specially developed for this application. The bus design allows a distance up to 15meters from engine to ecu while keeping the generated noise by the bus to a very low level to not affect other devices nor to be affected by them.  All engine parameters and timers are stored within the engine, installation parameters (radio settings,etc) are stored in the External ecu, enabling the swap of the engine without any adjustment. One engine can now be relocated in multiple airframes, additional Pump and External ECU are the only additions needed. Includes engine and all ancillary accessories needed to run the engine, except the battery. Recommended LiPo 11,1v 2200mAh

Be advised shipping via the checkout only includes carrier basic insurance with quotes, if you require full insurance please contact me.

Please email me to order